Description:
Control-correcting station (CCS) of the marine differential subsystem (MDS) GNSS (GLONASS/GPS) is designed to determine and transmit via the radio beacon of differential corrections for all the visible SNS GLONASS and GPS satellites.
CCS controls the integrity of GNSS GLONASS and GPS by determining inoperative satellites and transmitting this information to the water-crafts' receivers with the minimal time delay. CCS corresponds to RTCM RSIM v 1.1 standard. Differential corrections enable navigation equipment of consumers to secure high-accuracy and reliable determination of ship coordinates with accuracy of (2Σ) 1-5 meters at the distance of up to 300 kilometres from CCS.
Any GLONASS/GPS receivers and only GPS receivers provi-ding the reception of different-tial corrections according to the standard RTCM SC-104 version 2.1 and 2.2 can be used as equipment of consumers.
Control station is used for on-line condition monitoring and control over CCS operation with set-up parameters. Control station is made on the base of the computer of industrial version with NAVIOR® RSIM software.
|
Specification:
СН-3501 reference station corresponds to RTCM RSIM v1.1 standard and designed to determine the differential corrections for all GLONASS and GPS satellites located within the radio coverage and transform them into standard RTCM-messages for transmission via the built-in MSK modulator to the radio beacon or via RS232 interface to Automatic Identification System.
- Number of channels of the receiver - 28
- Type of an accepted signal:
GLONASS - L1, standard accuracy code;
GPS - L1, C/A code.
- Transmitted messages: 1,3,5,6,7, 9, 16,31, 32, 33, 34
35, 36, 37 according to RTCM
SC-104, Version 2.1 and 2.2.
- 4 serial ports RS232.
- Built - in MSК-modulator.
- MSК-modulator's bandwidth: 283.5-325 kHz.
- Supply power: from a network of an alternating current
220 V (+10 %,-15 %), 50 Hz±5% or DC 10 - 36 V
- Power consumption ≤ 30 W.
- Operating temperatures:
for the equipment - from 0°С up to +50°С,
for antennas - from-40°С up to +65°С.
- Length antenna's cables - 30 m.
- Dimensions: 132,5x448,8х326мм.
- Weight ≤ 6,5 kg.
- Number of channels of the receiver - 28
- Type of an accepted signal:
GLONASS - L1, standard accuracy code
GPS - L1, C/A code.
● Built-in receiver for differential correcting information (DCI).
● DCI receiver's bandwidth 283.5-325kHz
● 4 serial ports RS232.
● Supply power: from a network of an alternating current 220 V (+10 %,-15 %), 50 Hz or DC 10 - 36 V
● Power consumption ≤ 30 W.
●Operating temperatures:
for the equipment - from 0°С up to +50°С,
for antennas - from-40°С up to +65°С.
Length antenna's cables - 30 m.
Dimensions: 132,5x448,8х326мм.
Weight ≤ 8 kg
СН-3502 Integrity monitor corresponds to RTCM
RSIM v1.1 standard and designed for operation parameters of the
reference station and radio beacon continuous control, as well as
for GNSS GLONASS and GPS integrity control.
|
